How Much Is a Aluminum Gutter (5" K-style) Worth in Scrap?
Scrap value: $0.24 – $0.33 as of Nov 10, 2026. That is what a typical Aluminum Gutter (5" K-style) fetches at US scrap yards today. The exact payout depends on local prices, yard quality, and how well you've prepped the material.
| If the yard pays | You get |
|---|---|
| 50% of spot (typical low) | $0.24 |
| 60% of spot (typical) | $0.28 |
| 70% of spot (clean, sorted) | $0.33 |
What's inside a Aluminum Gutter (5" K-style)?
Standard 5-inch K-style residential aluminum rain gutter, painted or mill finish. Pays at clean aluminum extrusion rates when free of steel hangers, screws, and downspout brackets. Painted finish does not significantly affect the yard rate at most yards. A common contractor scrap stream from gutter replacement and reroofing jobs, where a single house typically yields 100-200 linear feet. Seamless gutter, the most common modern type, scraps identically.
| Material | Weight per unit | Per-lb rate (yard pays) | Per-unit value |
|---|---|---|---|
| Aluminum Extrusion | 0.47 lb | $0.49 – $0.69 /lb | $0.24 – $0.33 |
How to prep your Aluminum Gutter (5" K-style) before scrapping
Pull all steel hangers, brackets, and screws and sell those separately as light iron. Crush sections flat by stepping on them to triple your trailer or truck-bed capacity. 100+ linear feet is a meaningful payday for a small contractor cleanup.
Why prep matters: Most yards pay different rates for clean vs. mixed material. An hour of prep can roughly double your payout per pound on copper-bearing items.
What yards typically pay
90-day Aluminum Extrusion price estimate (US average) — the dominant material in a Aluminum Gutter (5" K-style).
Find yards that buy Aluminum Gutter (5" K-style) near you
Enter your ZIP to see scrap yards within 25 miles that accept this material.
Calculate value for your specific situation
Adjust the quantity, add other items, or enter your ZIP for a localized estimate.
| Material | Recovered | Rate | Value |
|---|---|---|---|
| Aluminum Extrusion | 0.47 lb | $0.49–$0.69/lb | $0.24 – $0.33 |
How are these prices calculated?
Each day we take metal spot prices from MetalpriceAPI and turn them into US average prices per scrap grade (spot × a grade factor; a few grades such as steel use fixed reference values). The calculator assumes a yard pays 50–70% of those grade prices, which gives the range you see. Full method.
Why a range?
Yards don't pay you the full grade price. They take a margin to cover transport, processing, and risk. The exact margin depends on grade quality, how clean the material is, local competition, and current end-buyer demand. The low end of our range is a conservative estimate; the high end is what well-prepared, clean material at a competitive yard can earn.
What affects your actual payout?
Preparation matters. Stripping copper wire to bare-bright roughly doubles the per-pound rate vs. selling it insulated. Removing brass fittings from copper pipe lets each metal sell at its proper grade instead of being downgraded to mixed. Quantity matters. Some yards offer better tiers for larger loads. Timing matters. Spot prices move daily; a 5% swing on copper is normal week-to-week.
Should I trust this estimate?
Treat it as a planning tool, not a guarantee. For large hauls, call two or three yards and ask for a per-pound quote on the specific grade. Don't haul anything more than 30 minutes without a quote — fuel costs add up. Most yards will quote over the phone if you describe the material accurately.
Related Outdoor & Yard
Frequently asked questions
How much is Aluminum Gutter (5" K-style) worth in scrap?
$0.24 – $0.33 as of Nov 10, 2026: that is the scrap value of a typical Aluminum Gutter (5" K-style) at US yards today, based on its metal content (Aluminum Extrusion (0.47 lb)) and current prices. The exact payout depends on local prices, yard quality, and how well you've prepped the material.
What metals are inside a Aluminum Gutter (5" K-style)?
A Aluminum Gutter (5" K-style) contains: Aluminum Extrusion (0.47 lb). Per-component recovery rates and current prices determine the value.
Should I prep a Aluminum Gutter (5" K-style) before scrapping?
Pull all steel hangers, brackets, and screws and sell those separately as light iron. Crush sections flat by stepping on them to triple your trailer or truck-bed capacity. 100+ linear feet is a meaningful payday for a small contractor cleanup.
Where can I take a Aluminum Gutter (5" K-style) to scrap?
Use the ZIP code form above to find scrap yards near you that accept Aluminum Gutter (5" K-style), with distance, contact info, and accepted-materials notes.
Estimates assume yard payouts at 50–70% of national spot. Actual payouts vary by region, yard, and material condition. Last updated Nov 10, 2026. © 2026 Scrapyards.io