How Much Is a Printer (Inkjet, Consumer) Worth in Scrap?
Scrap value: $0.71 – $0.99 as of Nov 10, 2026. That is what a typical Printer (Inkjet, Consumer) fetches at US scrap yards today. The exact payout depends on local prices, yard quality, and how well you've prepped the material.
| If the yard pays | You get |
|---|---|
| 50% of spot (typical low) | $0.71 |
| 60% of spot (typical) | $0.85 |
| 70% of spot (clean, sorted) | $0.99 |
What's inside a Printer (Inkjet, Consumer)?
A consumer inkjet printer or all-in-one. Mostly plastic by mass, which limits scrap value. The mainboard and small stepper motors are the only meaningful recoverables. Many yards classify these as 'low-yield electronics' and pay a flat token rate per unit, or refuse them entirely. E-waste recyclers are the better channel.
| Material | Weight per unit | Per-lb rate (yard pays) | Per-unit value |
|---|---|---|---|
| Light Iron / Sheet | 1.80 lb | $0.05 – $0.08 /lb | $0.10 – $0.14 |
| Low-Grade Circuit Board | 0.60 lb | $0.42 – $0.59 /lb | $0.26 – $0.36 |
| #2 Copper | 0.15 lb | $2.37 – $3.31 /lb | $0.35 – $0.50 |
How to prep your Printer (Inkjet, Consumer) before scrapping
Remove ink or toner cartridges first and recycle separately at the printer brand's mail-in program (HP, Epson, Canon all offer free postage-paid envelopes). Pull the mainboard for low-grade board scrap. The stepper and DC motors are small but worth pulling when processing printers in lots of 10 or more.
Why prep matters: Most yards pay different rates for clean vs. mixed material. An hour of prep can roughly double your payout per pound on copper-bearing items.
What yards typically pay
90-day Light Iron / Sheet price estimate (US average) — the dominant material in a Printer (Inkjet, Consumer).
Find yards that buy Printer (Inkjet, Consumer) near you
Enter your ZIP to see scrap yards within 25 miles that accept this material.
Calculate value for your specific situation
Adjust the quantity, add other items, or enter your ZIP for a localized estimate.
| Material | Recovered | Rate | Value |
|---|---|---|---|
| Light Iron / Sheet | 1.80 lb | $0.05–$0.08/lb | $0.10 – $0.14 |
| Low-Grade Circuit Board | 0.60 lb | $0.42–$0.59/lb | $0.26 – $0.36 |
| #2 Copper | 0.15 lb | $2.37–$3.31/lb | $0.35 – $0.50 |
How are these prices calculated?
Each day we take metal spot prices from MetalpriceAPI and turn them into US average prices per scrap grade (spot × a grade factor; a few grades such as steel use fixed reference values). The calculator assumes a yard pays 50–70% of those grade prices, which gives the range you see. Full method.
Why a range?
Yards don't pay you the full grade price. They take a margin to cover transport, processing, and risk. The exact margin depends on grade quality, how clean the material is, local competition, and current end-buyer demand. The low end of our range is a conservative estimate; the high end is what well-prepared, clean material at a competitive yard can earn.
What affects your actual payout?
Preparation matters. Stripping copper wire to bare-bright roughly doubles the per-pound rate vs. selling it insulated. Removing brass fittings from copper pipe lets each metal sell at its proper grade instead of being downgraded to mixed. Quantity matters. Some yards offer better tiers for larger loads. Timing matters. Spot prices move daily; a 5% swing on copper is normal week-to-week.
Should I trust this estimate?
Treat it as a planning tool, not a guarantee. For large hauls, call two or three yards and ask for a per-pound quote on the specific grade. Don't haul anything more than 30 minutes without a quote — fuel costs add up. Most yards will quote over the phone if you describe the material accurately.
Related Electronics
Frequently asked questions
How much is Printer (Inkjet, Consumer) worth in scrap?
$0.71 – $0.99 as of Nov 10, 2026: that is the scrap value of a typical Printer (Inkjet, Consumer) at US yards today, based on its metal content (Light Iron / Sheet (1.80 lb), Low-Grade Circuit Board (0.60 lb), #2 Copper (0.15 lb)) and current prices. The exact payout depends on local prices, yard quality, and how well you've prepped the material.
What metals are inside a Printer (Inkjet, Consumer)?
A Printer (Inkjet, Consumer) contains: Light Iron / Sheet (1.80 lb), Low-Grade Circuit Board (0.60 lb), #2 Copper (0.15 lb). Per-component recovery rates and current prices determine the value.
Should I prep a Printer (Inkjet, Consumer) before scrapping?
Remove ink or toner cartridges first and recycle separately at the printer brand's mail-in program (HP, Epson, Canon all offer free postage-paid envelopes). Pull the mainboard for low-grade board scrap. The stepper and DC motors are small but worth pulling when processing printers in lots of 10 or more.
Where can I take a Printer (Inkjet, Consumer) to scrap?
Use the ZIP code form above to find scrap yards near you that accept Printer (Inkjet, Consumer), with distance, contact info, and accepted-materials notes.
Estimates assume yard payouts at 50–70% of national spot. Actual payouts vary by region, yard, and material condition. Last updated Nov 10, 2026. © 2026 Scrapyards.io