How Much Is a Electric Dryer Worth in Scrap?
Scrap value: $13.03 – $18.24 as of Nov 10, 2026. That is what a typical Electric Dryer fetches at US scrap yards today. The exact payout depends on local prices, yard quality, and how well you've prepped the material.
| If the yard pays | You get |
|---|---|
| 50% of spot (typical low) | $13.03 |
| 60% of spot (typical) | $15.63 |
| 70% of spot (clean, sorted) | $18.24 |
What's inside a Electric Dryer?
A residential electric clothes dryer. The cabinet and drum are light-gauge steel; the heating element is a coiled nichrome wire wound around a ceramic former (the copper estimate above reflects motor windings, not the element itself). Gas dryers are similar in weight but contain a brass burner valve worth pulling. Scrap value is mostly determined by steel weight at light-iron rates.
| Material | Weight per unit | Per-lb rate (yard pays) | Per-unit value |
|---|---|---|---|
| Light Iron / Sheet | 114.75 lb | $0.05 – $0.08 /lb | $6.17 – $8.63 |
| #2 Copper | 2.70 lb | $2.37 – $3.31 /lb | $6.39 – $8.94 |
| Aluminum (Mixed) | 1.35 lb | $0.35 – $0.49 /lb | $0.47 – $0.66 |
How to prep your Electric Dryer before scrapping
Cut and remove the power cord (insulated copper wire). For gas dryers, unscrew the brass burner valve. The motor is worth pulling for the copper windings, but the element itself has minimal scrap value.
Why prep matters: Most yards pay different rates for clean vs. mixed material. An hour of prep can roughly double your payout per pound on copper-bearing items.
What yards typically pay
90-day Light Iron / Sheet price estimate (US average) — the dominant material in a Electric Dryer.
Find yards that buy Electric Dryer near you
Enter your ZIP to see scrap yards within 25 miles that accept this material.
Calculate value for your specific situation
Adjust the quantity, add other items, or enter your ZIP for a localized estimate.
| Material | Recovered | Rate | Value |
|---|---|---|---|
| Light Iron / Sheet | 114.8 lb | $0.05–$0.08/lb | $6.17 – $8.63 |
| #2 Copper | 2.70 lb | $2.37–$3.31/lb | $6.39 – $8.94 |
| Aluminum (Mixed) | 1.35 lb | $0.35–$0.49/lb | $0.47 – $0.66 |
How are these prices calculated?
Each day we take metal spot prices from MetalpriceAPI and turn them into US average prices per scrap grade (spot × a grade factor; a few grades such as steel use fixed reference values). The calculator assumes a yard pays 50–70% of those grade prices, which gives the range you see. Full method.
Why a range?
Yards don't pay you the full grade price. They take a margin to cover transport, processing, and risk. The exact margin depends on grade quality, how clean the material is, local competition, and current end-buyer demand. The low end of our range is a conservative estimate; the high end is what well-prepared, clean material at a competitive yard can earn.
What affects your actual payout?
Preparation matters. Stripping copper wire to bare-bright roughly doubles the per-pound rate vs. selling it insulated. Removing brass fittings from copper pipe lets each metal sell at its proper grade instead of being downgraded to mixed. Quantity matters. Some yards offer better tiers for larger loads. Timing matters. Spot prices move daily; a 5% swing on copper is normal week-to-week.
Should I trust this estimate?
Treat it as a planning tool, not a guarantee. For large hauls, call two or three yards and ask for a per-pound quote on the specific grade. Don't haul anything more than 30 minutes without a quote — fuel costs add up. Most yards will quote over the phone if you describe the material accurately.
Related Appliances
Frequently asked questions
How much is Electric Dryer worth in scrap?
$13.03 – $18.24 as of Nov 10, 2026: that is the scrap value of a typical Electric Dryer at US yards today, based on its metal content (Light Iron / Sheet (114.75 lb), #2 Copper (2.70 lb), Aluminum (Mixed) (1.35 lb)) and current prices. The exact payout depends on local prices, yard quality, and how well you've prepped the material.
What metals are inside a Electric Dryer?
A Electric Dryer contains: Light Iron / Sheet (114.75 lb), #2 Copper (2.70 lb), Aluminum (Mixed) (1.35 lb). Per-component recovery rates and current prices determine the value.
Should I prep a Electric Dryer before scrapping?
Cut and remove the power cord (insulated copper wire). For gas dryers, unscrew the brass burner valve. The motor is worth pulling for the copper windings, but the element itself has minimal scrap value.
Where can I take a Electric Dryer to scrap?
Use the ZIP code form above to find scrap yards near you that accept Electric Dryer, with distance, contact info, and accepted-materials notes.
Estimates assume yard payouts at 50–70% of national spot. Actual payouts vary by region, yard, and material condition. Last updated Nov 10, 2026. © 2026 Scrapyards.io