How Much Is a Washing Machine Worth in Scrap?
Scrap value: $17.75 – $24.84 as of Nov 10, 2026. That is what a typical Washing Machine fetches at US scrap yards today. The exact payout depends on local prices, yard quality, and how well you've prepped the material.
| If the yard pays | You get |
|---|---|
| 50% of spot (typical low) | $17.75 |
| 60% of spot (typical) | $21.29 |
| 70% of spot (clean, sorted) | $24.84 |
What's inside a Washing Machine?
A residential top-load or front-load clothes washer. The frame is light-gauge steel; the inner drum on most modern units is stainless steel (older units may be porcelain-coated steel, which scraps as light iron). A 20-30 lb concrete counterweight is bolted inside and counts as non-recoverable mass at most yards. Scrap value is moderate, with the stainless drum and copper motor providing the upside.
| Material | Weight per unit | Per-lb rate (yard pays) | Per-unit value |
|---|---|---|---|
| Light Iron / Sheet | 122.50 lb | $0.05 – $0.08 /lb | $6.58 – $9.22 |
| Stainless Steel (304) | 14.00 lb | $0.31 – $0.43 /lb | $4.34 – $6.08 |
| #2 Copper | 2.63 lb | $2.37 – $3.31 /lb | $6.21 – $8.69 |
| Aluminum (Mixed) | 1.75 lb | $0.35 – $0.49 /lb | $0.61 – $0.86 |
How to prep your Washing Machine before scrapping
Removing the stainless inner drum and selling it separately roughly doubles the per-pound rate for that portion. Cut motor leads and pull the motor for #2 copper windings. Drain residual water; many yards refuse wet units.
Why prep matters: Most yards pay different rates for clean vs. mixed material. An hour of prep can roughly double your payout per pound on copper-bearing items.
What yards typically pay
90-day Light Iron / Sheet price estimate (US average) — the dominant material in a Washing Machine.
Find yards that buy Washing Machine near you
Enter your ZIP to see scrap yards within 25 miles that accept this material.
Calculate value for your specific situation
Adjust the quantity, add other items, or enter your ZIP for a localized estimate.
| Material | Recovered | Rate | Value |
|---|---|---|---|
| Light Iron / Sheet | 122.5 lb | $0.05–$0.08/lb | $6.58 – $9.22 |
| Stainless Steel (304) | 14.0 lb | $0.31–$0.43/lb | $4.34 – $6.08 |
| #2 Copper | 2.63 lb | $2.37–$3.31/lb | $6.21 – $8.69 |
| Aluminum (Mixed) | 1.75 lb | $0.35–$0.49/lb | $0.61 – $0.86 |
How are these prices calculated?
Each day we take metal spot prices from MetalpriceAPI and turn them into US average prices per scrap grade (spot × a grade factor; a few grades such as steel use fixed reference values). The calculator assumes a yard pays 50–70% of those grade prices, which gives the range you see. Full method.
Why a range?
Yards don't pay you the full grade price. They take a margin to cover transport, processing, and risk. The exact margin depends on grade quality, how clean the material is, local competition, and current end-buyer demand. The low end of our range is a conservative estimate; the high end is what well-prepared, clean material at a competitive yard can earn.
What affects your actual payout?
Preparation matters. Stripping copper wire to bare-bright roughly doubles the per-pound rate vs. selling it insulated. Removing brass fittings from copper pipe lets each metal sell at its proper grade instead of being downgraded to mixed. Quantity matters. Some yards offer better tiers for larger loads. Timing matters. Spot prices move daily; a 5% swing on copper is normal week-to-week.
Should I trust this estimate?
Treat it as a planning tool, not a guarantee. For large hauls, call two or three yards and ask for a per-pound quote on the specific grade. Don't haul anything more than 30 minutes without a quote — fuel costs add up. Most yards will quote over the phone if you describe the material accurately.
Related Appliances
Frequently asked questions
How much is Washing Machine worth in scrap?
$17.75 – $24.84 as of Nov 10, 2026: that is the scrap value of a typical Washing Machine at US yards today, based on its metal content (Light Iron / Sheet (122.50 lb), Stainless Steel (304) (14.00 lb), #2 Copper (2.63 lb), Aluminum (Mixed) (1.75 lb)) and current prices. The exact payout depends on local prices, yard quality, and how well you've prepped the material.
What metals are inside a Washing Machine?
A Washing Machine contains: Light Iron / Sheet (122.50 lb), Stainless Steel (304) (14.00 lb), #2 Copper (2.63 lb), Aluminum (Mixed) (1.75 lb). Per-component recovery rates and current prices determine the value.
Should I prep a Washing Machine before scrapping?
Removing the stainless inner drum and selling it separately roughly doubles the per-pound rate for that portion. Cut motor leads and pull the motor for #2 copper windings. Drain residual water; many yards refuse wet units.
Where can I take a Washing Machine to scrap?
Use the ZIP code form above to find scrap yards near you that accept Washing Machine, with distance, contact info, and accepted-materials notes.
Estimates assume yard payouts at 50–70% of national spot. Actual payouts vary by region, yard, and material condition. Last updated Nov 10, 2026. © 2026 Scrapyards.io